Print & product workflows
Pattern print size: pixels, inches and PPI
Calculate a pattern tile's print size from pixels and PPI, compare an 8-inch repeat at two resolutions, and check what upscaling can change.
To calculate the printed width of a raster pattern tile, divide its width in pixels by the pixels per inch you intend to print. To calculate the pixels you need, multiply the intended width in inches by that resolution.
printed inches = pixels ÷ PPI
required pixels = printed inches × PPI
PPI describes the image's pixels per inch. DPI technically describes a printer's dots per inch, although upload instructions sometimes use “DPI” when referring to image resolution. Follow the requirements of the printer handling your file.
An eight-inch repeat, worked through
Suppose you want one tile to repeat every eight inches. These examples are calculations, not recommendations for every material:
| Intended tile width | Image resolution | Required tile width |
|---|---|---|
| 8 inches | 150 PPI | 1,200 pixels |
| 8 inches | 300 PPI | 2,400 pixels |
A 2,400-pixel tile printed eight inches wide has 300 pixels per inch. Print that same tile sixteen inches wide and it has 150 pixels per inch. The artwork has not gained detail; its existing pixels are spread over a larger area.
For centimetres, divide the measurement by 2.54 to obtain inches before multiplying by PPI. For a rectangular tile, calculate both width and height.
Motifold's free Print-size calculator does this arithmetic for you in pixels, PPI, centimetres and inches.
Separate tile size from the full print area
A fabric panel may be much wider than a single repeat. If the printer accepts a repeating tile, it can repeat that tile across the required area. If it asks for a full-size layout, prepare that layout to its specifications instead.
Confirm which file it needs before enlarging the tile. Making every motif larger to fill a panel can change the design when your intention was simply to repeat it more times.
Changing metadata is not adding detail
Changing a file's resolution label from 150 to 300 PPI without resampling does not create more pixels. It changes the physical size associated with those pixels.
Upscaling creates a larger pixel image. It may help prepare a file for a target size, but generated detail is not proof that the original detail was recovered. Inspect fine lines, texture, lettering and edge joins after enlargement.
Motifold's image upscaler page currently describes free output up to 2,048 pixels and larger sizes on paid plans. Check the available size and plan in the tool before choosing your workflow.
Review the file the printer will receive
Check the exported dimensions, intended repeat width, required colour settings and accepted format. Review any bleed or layout instructions separately; they are not determined by the pixel-to-inch calculation.
Finally, check the repeat across multiple tiles. The right pixel count does not guarantee a clean seam, and a clean seam does not guarantee the right physical scale. When the result matters, confirm it with a printed sample.